Film Processing and Equipment    Main Page

Beutler and D23 Prep Page

 

 

 

Agitation Pattern - Initial 60 seconds then 2 inversions in 5 seconds every 60 seconds.

Development Stats:  Two reel stainless steel tank, inversion and twist agitation.

 

1.  No Pre-soak

2.  D23 1:0.

3.  Stop with water,  four dumps.

4.  Fix A 3 minutes, agitation first 30 sec then for 10 sec every subsequent 30 seconds. Fix B 2 minutes same agitation

5.  Wash 5, 10, 15, 20 second heavy agitation with rinsing between; 3 5 minute soaks with rinsing between.

6.  Hang and sprits with DI water

 

Densitometry - Measurements taken from center of negative using Macbeth TD-502.

 

Exposures - All exposures were taken using a flat painted grey surface. 

 

 

This is used replenished.

 

 

 

 

 

 

Go to KB 100 Tests